TetraFauna Aquatic Reptile Heater 100 Watts, For Frogs, Newts And Turtles, Green

Directions

This heater is for indoor aquatic terrarium use only. 1.Determine the best place to locate the heater in the aquatic portion of your terrarium. Ideally, the heater should be placed on the bottom in an area with ample water circulation. a. NOTE: The heater should always be completely submerged in water when plugged in. Decide how you will route the power cord. 2.Unlock the heater housing by pressing the two buttons on the end of the housing. 3.Lift the end of the housing and route the heater cord through one of the three openings, depending on how the heater will be positioned in the terrarium. 4.Close the heater cage by snapping the locking tabs into place. 5.Position the heater in the terrarium. 6.Press down lightly on the unit to secure both suction cups to the bottom of the terrarium. 7.Route the power cord out of the terrarium. 8.Create a drip loop. 9.Wait at least 15 minutes for the heater to stabilize to the current water temperature. 10.Plug the heater into a standard electric wall outlet. NOTE: If you are installing the heater in a new terrarium, fill to the desired water level, wait 15 minutes, and then plug the heater into the electrical wall outlet. Allow at least 24 hours for the water to reach the correct temperature before adding reptiles or fish.